30v Gigabit Surge Suppressor
The 30v Gigabit Surge Suppressor is critical for lightning protection to minimize the potential for damage. The Gigabit Ethernet Surge Suppressor is compatible with the 450 and 450b (Subscriber Module), F180, F200, (and other 30V Gigabit products). The unit ships suitable for mounting to a wall or pole.
4.9 to 5 GHz Dual Pole 90 Degree Sector Antenna
Sector antenna solution for PTP 670/700 High-Capacity MultiPoint (HCMP) radios that enables network operators to connect up to 8 PTP radios to a single HCMP access point. Especially well-suited to high-density networks requiring frequency re-use and wide-band spectrum coverage, as well as video surveillance and mission-critical infrastructure backhaul applications.
5.25-5.85 GHz Standard Performance Dual Polarity Parabolic Reflector Antenna
High-Performance Dual Pole Parabolic Reflector Antennas from Cambium Networks are well-suited for deployment with any of the sub-6 GHz PTP products. They are engineered to provide ETSI class 2/3 radiation pattern performance as well as excellent gain.
5.25-5.85 GHz Standard Performance Single Polarity Parabolic Reflector Antenna
The Standard Performance Single Pole Parabolic Reflector Antenna is engineered to be rugged, cost effective and deliver reliable radio links. Designed for sub-6 GHz unlicensed band applications, field-proven preassembled SP antennas and robust pole mounts ensure “set and forget” installation with minimal post-installation maintenance.
56 VDC Gigabit Ethernet Surge Protector
The Gigabit Ethernet Surge Suppressor is critical for lightning protection to minimize the potential for damage. The Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber Module), PTP 450i, and PTP 820S. The unit ships suitable for mounting to a wall or pole.
900 MHz Directional Antenna
The directional antenna is compatible with PMP 450i 900 MHz.
900 MHz Sector Antenna
The Sector Antenna is compatible with the PMP 450i 900 MHz.
CMM5
The CMM5 is the latest generation of solutions for the distribution of TDD Synchronization signals and Power over Ethernet in the Cambium Networks’ portfolio. The CMM5 is a modular design with individual 4-port power injectors and an optional controller used for remote management.
cnPulse Sync Generator
cnPulse is the latest GPS synchronization generation device designed specifically for Cambium Networks PMP and PTP radios. The cnPulse module is IP67 (weatherproof) and supports a wide temperature range for rugged environments. The GPS receiver is highly reliable and supports both GPS and GNSS signals. cnPulse gets it power from the ODU AUX port in mode 1 or from the CAT-5 drop cable in mode 2 so no external power supply is required. There are no configuration or software settings required.
Lightning Protection Unit
The Cambium Networks PTP 650 Wireless Broadband solutions are ruggedized to operate in the toughest environments. Lightning strikes are the most typical cause of system outages or failures of mast-mounted equipment, especially when mounted as high as 300m. Therefore, lightning protection is critical to minimize the potential for damage. Cambium Networks strongly recommends that all PTP 650 installations should be deployed with the PTP-LPU. Network operators should always follow best-practices for grounding and lightning protection. Doing so will minimize network outages and reduce the associated costs of tower climbs and equipment repair/replacement.
Network Indoor Unit
The PTP 650 Network Indoor Unit (NIDU) is a hardware device which enables the passing of T1/E1 TDM circuits over PTP 650 fixed wireless broadband connections. Using the NIDU, information from existing TDM circuits is delivered reliably, meeting the precise latency and jitter requirements needed for T1/E1 traffic.
PTP Sync Unit
Many applications of PTP 650 require the deployment of a number of point-to-point (PTP) radios on the same tower or installation of a number of links in a large, dense network configuration. This is typically done to minimize tower or rooftop space and reduce operating costs while making the maximum use of available spectrum. By synchronizing the transmit and receive phases of the TDD system the potential for self-interference in these dense networks is minimized. The PTP-SYNC module synchronizes multiple PTP 650 connections by providing a common clock signal and GPS signal reference.
